TASKEM 2000数字高度表
当前位置:首页 > 湖南天翼航空设备有限公司 >> 航空仪表 >> 高度表
TASKEM 2000数字高度表
详细介绍
• 显示: 彩显(LED),液晶显示屏,电源打开时显示屏自动进行检测。 • 数据更新速度: 所有输出数据和显示数据均为每0.6秒更新一次。 • 操作: 通过仪表面板上的一个单键即可完成操作模式的选择。操作模式都按逻辑方式排列,方便记忆。 • 氧气量报警: 如果高度超过12500英尺,就会有一个LED的高亮显示需要增加氧气量。 • 预热过程: 2分钟之内预热。使用了一个小型的加热室以保持临界压力。当加热室达到操作温度时才会有数据显示。 • SERIAL OUTPUT: Pressure altitude, altitude and vertical speed (VSI) are output in 5 Volt, RS-232 format at 9600 baud. Outside air temperature (OAT) and density altitude are also output if temperature/density option is installed. Baud rate is not adjustable. • POWER REQUIREMENTS: 11 to 35VDC. Operates directly from standard 14 or 28V aircraft power without modifications or adapters. At 14V, 400mA maximum current drain during warm-up, 60mA typical thereafter. • BACKLIGHTING VOLTAGE: Separate inputs for 14 or 28V lighting sources. 10mA maximum current drain at full brightness. • ENVIRONMENTAL CONDITIONS: Meets or exceeds all temperature, humidity, vibration, over-pressure and magnetic effect requirements of FAA TSO-C10b, paragraph 3.3. • WEIGHT: Less than 8 ounces. • DIMENSIONS: Standaard 3 1/8” instrument case. 3” dia x 3 7/8” depth behind back of instrument panel (plus 3/4” connector depth). • MATING ELECTRICAL CONNECTOR: 26 pin card edge connector, 3M thpe 3462 or equivalent, supplied with 4’ cable pigtail. • PRESSURE CONNECTOR: 3/16” barb. Mates with 5/32” ID x 9/32” OD plastic tubing, Nalgene series 180 or Tygon R-3603 or equivalents. A sample length is supplied. |
ALTITUDE: ALTITUDE ALERT MODE: |